Fraud Blocker

Why won’t my uPVC door lock properly?

Why won’t my uPVC door lock properly?

Why won’t my uPVC door lock properly?
Knowledge Centre

A uPVC door that will not lock is not necessarily a broken lock: the door may have dropped slightly on its hinges, so the locking points no longer line up with the keeps on the frame – an alignment problem. The other usual suspect is a worn gearbox inside the mechanism. Both are repairable.

The one thing not to do is force the handle. That is how a simple realignment turns into a broken mechanism.

How to tell what is wrong

One quick check tells you a lot before anyone sets off:

The open-door test. Open the door, lift the handle and turn the key with the door open. If the hooks and bolts throw smoothly and the key turns freely, that suggests the mechanism is moving freely and the problem is more likely alignment. If it is stiff, gritty or jammed even with the door open, the problem may be inside the mechanism. Either way, the locksmith’s inspection is what confirms it.

The usual causes

A dropped or misaligned door. uPVC doors settle on their hinges over the years, and extreme heat makes the slab expand in summer while extreme cold contracts it in winter – the reason a door can be stiff in hot weather and fine again in autumn. Either way the rollers, hooks and deadbolts stop meeting their keeps squarely. Symptoms: you have to pull or lift the door to lock it, it got gradually stiffer over months, or it is worse in hot weather. The fix is an adjustment of the hinges, the keeps or both – routine adjustment work.

A worn or failed gearbox. The gearbox is the small case behind the handle that drives the whole multipoint locking system – the strip of hooks, rollers and bolts down the edge of the door. Inside are springs and levers that eventually wear. Symptoms of a uPVC gearbox failure: the handle goes floppy or loose, the key spins or will not turn, or the door is locked and will not open at all. The gearbox is replaced – the rest of the strip can usually stay – and the mechanism is restored.

A worn euro cylinder. Keys that catch, or only work from one side, point to the cylinder rather than the mechanism. A straightforward swap, and a sensible moment to fit a higher-security cylinder.

Debris and dried-out moving parts. Dirt in the keeps and a mechanism that has never been lubricated adds stiffness everywhere. Often part of the same service visit rather than the root cause.

Symptom, cause and fix at a glance

SymptomLikely causeWhat it takes
Locks fine when open, stiff when closedSuggests a dropped or misaligned doorInspection, then hinge and keep adjustment
Have to lift the handle hard to turn the keyMisalignment wearing the gearboxRealignment now, before the gearbox fails
Handle floppy, key spins or jamsWorn or broken gearboxGearbox replacement
Key catches or only works one sideWorn euro cylinderCylinder swap
Stiff in hot weather onlySlab expanding in heatAdjustment with seasonal allowance
Door locked shut, will not openCould be a failed gearbox – inspection confirmsNon-destructive opening where possible, then the repair it needs

Why you should not force it

Multipoint mechanisms fail progressively. Forcing a stiff handle snaps the small components inside the gearbox – the classic path from “needs adjusting” to “needs a new mechanism and the door is stuck shut at nine at night”. If the handle needs strength, stop. A realignment at the stiff stage is a quick job for a locksmith.

The same goes for the key. A key that needs jiggling is telling you something is wearing, and keys snap in locks – which turns one visit into two jobs.

What a locksmith will do

A proper visit starts with the open-door test and an inspection of the hinges, keeps and strip, so the cause is identified before anything is taken apart. Realignment is adjustment work: hinges repacked or adjusted, keeps moved to meet the locking points, the strip lubricated. A failed gearbox means mechanism replacement: the multipoint strip comes out, the gearbox is swapped, and everything is refitted and tested. A whole new multipoint strip is only on the cards when the strip itself is damaged or a compatible gearbox is no longer made – the inspection shows which. In either case you should know the full price before work starts – send a photo of the door, handles and strip when you call and the quote will be more accurate.

The price is agreed before anyone sets off, and work never starts until you have agreed it. AHLP advertises a 30-minute response, available every hour of every day.

Frequently asked questions

Can I realign a uPVC door myself?

The hinge and keep adjustments use ordinary Allen keys, and there is no harm in a careful owner lubricating the strip. The risk is adjusting blind and making the locking worse, or masking a gearbox that is on its way out. If the door needs more than a light touch after a basic check, it is quicker to have it set properly.

How much does it cost to fix a uPVC door that will not lock?

It depends on whether it is adjustment or parts. Realignment is the cheaper job; a gearbox replacement costs more because of the part. The full price is agreed before work starts, so there are no surprises either way.

The door is locked and will not open – can it be opened without damage?

That is always the aim. Non-destructive release is the first approach – whether it succeeds depends on the mechanism, and the inspection shows that. Destructive entry is the last resort, not the first.

Will I need a whole new mechanism?

Not necessarily. The multipoint strip and the gearbox are separate parts, and the gearbox is the part that wears. Where a strip is very old or discontinued, compatible gearboxes exist for a wide range of the mechanisms fitted in UK homes.

Is it worth upgrading security while the lock is being repaired?

It is the natural moment for it. If the cylinder is coming out anyway, upgrading to an anti-snap cylinder adds little time. Whether it makes sense for your door depends on what is fitted now – ask when you book and you will get a straight answer.

  1. AHLP: locksmith services and published prices (ahlp.co.uk) https://ahlp.co.uk/locksmith-services/
  2. AHLP Knowledge Centre: Can a locksmith open a uPVC door without damaging it? (ahlp.co.uk) https://ahlp.co.uk/can-a-locksmith-open-a-upvc-door-without-damaging-it/
  3. AHLP Knowledge Centre: My key has snapped in the lock – do I need a replacement lock? (ahlp.co.uk) https://ahlp.co.uk/my-key-has-snapped-in-the-lock-do-i-need-a-replacement-lock/

Sources checked 27 October 2026; links re-verified 29 October 2026. Every door is different – the inspection settles the cause, and the quote you agree before work starts is the price that matters.

Have questions or need support?
Reach out to us!
x